Microphone Set Removal
Prerequisite:
LCD Panel Removal
1. Locate module (D) on LCD module cover.
2. Release foil tabs (A) covering module cable (B).
Figure 3-70. Microphone Module and Cable
3. Lift foil tab covering module.
4. Remove module (C) and cable (B) from LCD module cover.
Microphone Set Installation
1. Install module (C) and module cable (B) on LCD module cover.
2. Secure foil tab covering module (C) to LCD module cover.
3. Secure foil tabs (A) covering module cable (B) to LCD module cover.
4. Install LCD panel.
3-64
C
A
B
A
Machine Maintenance Procedures
0
0