Table of Contents
Advertisement
INTRODUCTION
Installation and connection
Selecting the room
• Install the appliance in a dry and well ventilated room. The appliance will operate correctly if
the environment temperature is in the interval specified in the table. The appliance class is
indicated on the rating plate / label with the basic information of the appliance.
Class
SN (subnormal)
N (normal)
ST (subtropical)
T (tropical)
Note: Place the appliance in a sufficiently large room. There should be at least
3
1 m
of space per 8 grams of refrigerant. Amount of refrigerant is indicated on the rating plate in
the appliance interior.
• At the base of the kitchen unit intended for building in the integrated appliance, there should
be at least 200 cm
2
On the upper part of the appliance the air is coming out, so try not to cover the opening for
the outflow air. Ignoring this caution may result in damage to the appliance.
Temperature
from +10°C to +32°C
from +16°C to +32°C
from +16°C to +38°C
from +16°C to +43°C
Do not place an appliance in a room where
temperature can drop to below 5°C as this may
cause abnormal appliance operation or failure!
free space, for adequate air circulation.
Relative Humidity
≤75%
EN 11
Advertisement
Table of Contents
