Using The Picture Menu - Hisense K300 Series User Manual

Changing the TV Settings

Using the Picture Menu

Picture Mode
Brightness
Contrast
Color
Sharpness
Tint
Back Light
Color Temperature
Noise Reduction
■ Picture Mode - Press [◄/► ] to select between 5 different pre-adjusted picture modes: Dynamic, Bright,
Standard, Soft and User (configurable mode). The User mode automatically preserves your personal settings
after adjusting brightness, color and contrast etc.
■ Brightness - Adjust the overall luminance of the image from dark to bright according with room lighting
conditions or according to personal preferences.
■ Contrast - Adjusts of the relative intensity of both black and white areas of the image simultaneously. As the
contrast increases blacks are deeper and whites are brighter.
■ Color - Adjusts the saturation of colours. Higher settings produce more vivid and intense colours.
■ Sharpness - Increasing the sharpness setting will produce better defined edges. It is advisable to reduce
sharpness to minimize image noise present in low quality video content.
■ Tint - This control is only intended for reducing colour bias of NTSC colour system signals.
■ Back light - Controls the luminosity of the LCD panel of the television. Optimal energy consumption will result
from using low backlight settings that are adequate for the lighting conditions of the room.
■ Color Temperature - The options Cool, Warm and Normal produce subtle colour balance differences to suit
personal preferences and correction of content with a particular colour imbalance.
■ Noise Reduction - Some lower quality video content can be improved by using this noise filter.
PICTURE
Standard
50
50
50
50
50
50
Normal
Medium
● Press [Menu] to open the main menu.
● Press [▲/▼] to select Picture, then press [►/OK] to
enter the Picture menu.
● Press [▲/▼] to select an option.
● Press [◄/►] to adjust the option or press [►/OK] to
enter the submenu.
● Press [Menu] to return the previous menu.
● Press [EXIT] to terminate this menu.
24