Changing the TV Settings
Using the Option Menu
OSD Language
Audio Language
Subtitle Language
Blue Screen
Installation Guide
Time
OSD Settings
Restore Factory Default
PVR File System
■ OSD Language - Press [◄/►] to select the OSD Language.
■ Audio Language - Press [◄/►] to select the Audio Language. (Available only for DTV source)
■ Subtitle Language - Press [◄/►] to select the Subtitle Language. (Available only for DTV source)
■ Blue Screen - Press [◄/►] to turn on/off the Blue Screen effect by selecting "On" or "Off".
■ Installation Guide - Press [◄/►] to turn on/off the Installation Guide effect by selecting "On" or "Off". When
you set up as "On", you can restart the TV set, and the Installation Guide menu will pop up.
■ Time - Press [▲/▼] to select Time in the Option OSD, and press [►/OK] to enter. It contains Clock, Off Time,
On Time, Sleep Timer, Auto Sleep and Time Zone.
● Clock - Display date and time. Press [►/OK] to enter the menu, then press [▲/▼] to select the Date, Month,
Year, Hour and Minute. Press [◄/►] to adjust the value.
● Off Time - Set the Off Time. Press [►/OK] to enter the menu, then press [▲/▼] to select the Off Time
mode, Hour and Minute. Press [◄/►] to adjust the value.
● On Time - Set the On Time. Press [►/OK] to enter the menu, then press [▲/▼] to select the Off Time
mode, Hour and Minute. Press [◄/►] to adjust the value.
● Sleep Timer - Press [◄/►] to set the Sleep Timer between 0-240minutes.
● Auto Sleep - During the time, if there is no operation, the TV into standby mode. You can press [◄/►] to set
this time from Off, 3H and 4H.
● Time Zone - Press [◄/►] to set a Time Zone corresponding to your region.
■ OSD Settings - The time it takes the OSD to disappear when no operations are performed.
● OSD Time Out - You can change it from Off, 10, 15, 30, 45, and 60 seconds.
● OSD Transparency - You can change it from Off ,1,2,3,4. to suit the required transparency.
OPTION
English
Off
Off
● Press [Menu] to open the main menu.
● Press [▲/▼] to select Function, then press [►/OK] to
enter the Function menu.
● Press [▲/▼] to select an option.
● Press [◄/►] to adjust the option or press [►/OK] to
enter the submenu.
● Press [Menu] to return the previous menu.
● Press [EXIT] to terminate this menu.
26