ABB HT571908 Operation Manual page 26

CAUTION
© Copyright 2016 ABB. All rights reserved.
Safety
Safe operation and maintenance
Wear personal protective equipment (PPE) according to the material
τ
safety data sheet.
Inspect the electric cables for abrasion and damage before and after
τ
your cleaning work.
Safety during disassembly, assembly, maintenance and troubleshooting
Always perform the specified adjustments, servicing as well as inspec-
τ
tion work and observe inspection intervals.
Inform operating personnel about all service and repair work before
τ
beginning.
Before opening a cover or removing a protective device on a turbo-
τ
charger, the engine must be switched off and the turbocharger must
have come to a standstill.
Ensure that the supply of oil is interrupted, especially with an external
τ
oil supply.
Put the engine into operation only after all parts have been refitted
τ
properly.
Mechanical work on the turbocharger
Possible damage to or destruction of components on the turbocharger.
Perform only those tasks that are described in this manual.
τ
Perform work only for which training has been carried out.
τ
Safety when taking out of operation or preparing for mothballing
Secure the rotor so it cannot turn. The rotor can turn on its own from
τ
the force of the stack draught.
Clean the turbocharger before mothballing it.
τ
Observe the material safety data sheet for the cleaning and mothball-
τ
ing agents.
Wear personal protective equipment (PPE) according to the material
τ
safety data sheet.
Operation Manual / TPS44-F.. - TPS61-F..
2
2.6 Page 24