ABB HT571908 Operation Manual page 106

Nozzle ring press fit for
multiple inlet turbine cas-
ing
NOTICE
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Disassembling and assembling
turbocharger
Calculate the press fit (PD) as shown.
τ
If the calculated value (PD) is outside ±0.2 mm, an official ABB Turbo-
charging Service Station must be contacted.
Measure the axial and radial clearances (see the section Axial and ra-
τ
dial clearances).
Operation Manual / TPS44-F.. - TPS61-F..
8
8.3 Page 104