Table of Contents
Advertisement
If provided
© Copyright 2015 ABB. All rights reserved.
Disassembly and assembly
Disassembling and assembling
turbocharger
Fitting the gas outlet flange and gas outlet bend
If provided, fit the C-ring (52408).
Fit the gas outlet flange (52400).
In the case of gas outlet bends (51100) from ABB Turbo Systems:
always replace the gasket (52406) (see the chapter entitled Spare
parts).
Apply high-temperature grease to contacting surfaces and threads.
Fit the turbine casing using the nuts (52433) while observing tightening
torques specified in the table of tightening torques.
Fasten the insulation.
Attach pipes in accordance with the enginebuilder's instructions.
Operation Manual / TPS44-F.. - TPS61-F..
8
8.3
Page 106
Advertisement
Table of Contents
