ABB HT563800 Operation Manual page 104

Nozzle ring press fit for
multiple inlet turbine
casing
NOTICE
© Copyright 2015 ABB. All rights reserved.
Disassembly and assembly
Disassembling and assembling
turbocharger
Calculate the press fit (PD) as shown.

If the calculated value (PD) is outside ±0.2 mm, an official ABB
Turbocharging Service Station must be contacted.
Measure the axial and radial clearances (see the section Axial and

radial clearances).
Operation Manual / TPS44-F.. - TPS61-F..
8
8.3 Page 102