Unpacking; Warning; Cleaning Notices; Precaution - Digimate L-1523 User Manual

Unpacking

Our 15.4" LCD monitor shall be content with these following items. Make sure you get all these set ready,
otherwise contact to your dealer or store which you purchased it. At last, feel free to contact us.
15.4" TFT LCD Monitor
External Univ15 pin D-sub
(RGB Analog) input signal
cable
Audio connector :
stereo Phone Jack
Quick Start Guide

Warning

1. Make sure that the system power is turned off.
2. Plug the signal cable to the signal connector at the rear of PC.
3. Plug adapter output cable to the jack at the rear of LCD monitor and the power cord to the adapter.
4. Connect the power cord to power source.
5. Turn on the computer and the monitor.
6. For the best quality of the performance, we suggest you to set resolution as Display Mode.
Cleaning Notice
1. Unplug the power cord from the AC outlet before clean the product.
2. Never, ever, using any kind of corrosiveness chemical dissolvent to clean the screen, it may hurt your
screen surface.
3. We suggest that using a clean camel hair brush or a soft, clean, lint-free cloth to wipe the screen.
4. Don't give any pressure directly to the LCD

Precaution

1. Do not expose the monitor to direct sunlight or heat.
2. Do not spill liquid on the monitor.
3. Do not attempt to open the monitor. You may be hurt by electric shock. For service, call your place of
purchase.
4. Do not use your monitor when magnets or electronic products are operating nearby.
5. Do not use harsh chemicals or strong cleaning solvents to clean the monitor screen. Wipe it with clean,
soft clothes applied with mild solution.
6. Do not place anything on your monitor. Bad ventilation may elevate temperature in the monitor.
7. Don't use your fingers to touch the LCD Screen, directly. Fingerprint that contains oil and may by
difficult to clear.
External Universal AC
Adaptor
User's manual
3