Memory Problems - Dell Studio 1555 Setup Manual

Solving Problems
If the power light is blinking white — The
computer is in standby state or the display may
not be responding.
• Press a key on the keyboard, move the
connected mouse or a finger on the touch
pad, or press the power button to resume
normal operation.
• If the display is not responding, press the
power button until the computer turns off
and then turn it back on.
• If the problem persists, contact Dell (see
"Contacting Dell" on page 76).
If you encounter interference that hinders
reception on your computer — An unwanted
signal is creating interference by interrupting or
blocking other signals. Some possible causes of
interference are:
• Power, keyboard, and mouse extension cables.
• Too many devices connected to a power strip.
• Multiple power strips connected to the same
electrical outlet.
52

Memory Problems

If you receive an insufficient memory
message —
• Save and close any open files and exit any
open programs you are not using to see if
that resolves the problem.
• See the software documentation for minimum
memory requirements. If necessary, install
additional memory (see the Service Manual
at support.dell.com/manuals).
• Reseat the memory module(s) into the
connector(s) (see the Service Manual at
support.dell.com/manuals).
• If the problem persists, contact Dell (see
"Contacting Dell" on page 76).
If you experience other memory problems —
• Run the Dell Diagnostics (see "Dell
Diagnostics" on page 59).
• If the problem persists, contact Dell (see
"Contacting Dell" on page 76).