Brant Radiant Heaters DX3L Series Manual page 25

DX3L Series
Chart 3.5
Common Optional Accessories
Reflector Accessory
Elbow Reflector*
U-Reflector*
Side Shield Extension**
Protective Guard
* Reflectors cannot be angled when used with a reflector elbow (RE),or side shield (SSE).
** Refer to the Clearance to Combustible chart see page 12 for minimum distances to combustibles
when side shield extension(s) are used.
Figure 3.18 • Reflector Shield Accessories
90° bend, highly polished aluminum reflector elbow
designed to fit atop one elbow accessory fitting.
180° bend, highly polished aluminum reflector
U-bend designed to fit atop one U-bend accessory
fitting.Reference figure 3.6
Highly polished side shield extension used to direct
infrared rays downward, away from sidewalls and
combustibles.
Used to prevent debris or objects from becoming
lodged between the radiant tube and reflector.
Required when mounting heaters below 8 ft.
Elbow reflector (P/N: RE)
Used over a 90-degree elbow radiant tube.
U-shaped reflector (P/N: RU) Used over a 'U'
shaped radiant tube.
Description
Side shield extension, (P/N: SSE) Directs
infrared rays downward, away from
sidewalls and combustibles.
25
3.0 Installation • Reflector Assembly
Part Number
RE
RU
SSE
PG