Table of Contents
Advertisement
Chapter 2
2 1
Position Your Modem Router
With the modem router, you can access your network from anywhere within the wireless
network coverage. However, the wireless signal strength and coverage vary depending
on the actual environment of your modem router. Many obstacles may limit the range
of the wireless signal, for example, concrete structures or thick walls.
For your safety and best Wi-Fi performance, please:
• Do Not locate the modem router in the place where it will be exposed to moisture or
excessive heat.
• Keep away from the strong electromagnetic radiation and the device of
electromagnetic sensitive.
• Place the modem router where it can be connected to the various devices as well as
to a power source.
• Make sure the cables and power cord are safely placed out of the way to avoid a
tripping hazard.
• Keep the outside two antennas be outward at about 30 degrees (recommended).
Tips: The modem router can be placed on a shelf or desktop.
2 2
Connect Your Modem Router
Follow the steps below to connect your modem router.
1
Connect the DSL line and power adapter. The electrical outlet shall be installed
near the device and shall be easily accessible.
Power Adapter
5
Verify that the following LEDs are on and stable
before continuing with the configuration.
Power On
DSL
On
Note: The DSL LED takes about 1 to 2 minutes to stabilize.
2
Connect your computer to the modem router.
4
Modem Router
Push in to turn on the
modem router.
Connect the Hardware
1
Attach the antennas.
3
If you don't need the phone service, just directly
connect the modem router to the phone jack
with the provided phone cable, then follow steps
4 and 5 to complete the hardware connection.
Phone Cable
Phone Jack
2
PHONE MODEM
DSL Splitter
Phone(Optional)
8
Advertisement
Table of Contents
