Asus MG248QR User Manual page 22

•. ASCR: Turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
•. Adaptive-Sync.(DisplayPort only)
graphics source to dynamically adjust display refresh rate based on
typical content frame rates for power efficient, virtually stutter free and
low-latency display update.
To activate Adaptive-Sync, turn off ELMB function first.
* Adaptive-Sync can only be activated within 40Hz ~ 144Hz.
* For supported GPUs, minimum PC system and driver requirements,
please contact the GPU manufactures.
•. ELMB: Turns on/off the ELMB (Extreme Low Motion Blur) function. This
function is available when the refresh rate is 85Hz, 100Hz or 120Hz.
To activate ELMB, turn off Adaptive-Sync function first.
5.. Sound
Set the sound related setting from this menu.
Sound
V ol um e
M ut e
S ource
•. Volume: the adjusting range is from 0 to 100.
•. Mute: toggles the monitor sound between on and off.
•. Source: decides the monitor sound comes from which source.
6.. Input.Select.
In this function, you can select your desired input source.
Input Select
D V I
H D M I
D i s p l a yPort
3-4
Allows an Adaptive-Sync supported*
:
ASUS MG248
RacingMode HDMI 1080p 60Hz
ASUS MG248
RacingMode HDMI 1080p 60Hz
Chapter 3: General Instructions