Table of Contents
Advertisement
UsInG THE PRoJECToR
Usb Power
Set the USB power settings.
‡
one: The projector is always powered on by a USB power source.
‡
offe: The USB Power function is off.
‡
autoe: The projector is automatically powered on by a USB power source.
Wireless (Type 2)
Set this function "On" to allow the projector to be turned on over the wireless network.
setup security menu
security
Enable this function to prompt for a password before using the projector.
‡
one: Choose "On" to use security verification when the turning on the projector.
offe: Choose "Off" to be able to switch on the projector without password verification.
‡
security Timer
Can be select the time (Month/Day/Hour) function to set the number of hours the projector can be used. Once this
time has elapsed you will be requested to enter your password again.
Change Password
Use to set or modify the password that is prompted when turning the projector on.
setup HDmI link settings menu
notee:
‡
When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control
them on the same power on or power off status using the HDMI Link control feature in the projector's
OSD. This lets one device or multiple devices in a group power on or power off via HDMI Link Feature
in a typical configuration, your DVD player may be connected to the projector through an amplifier or
home theater system.
HDmI link
Enable/disable the HDMI Link function. The inclusive TV, power on link, and power off link options will only
available if the setting is set to "On".
Inclusive of TV
Set to "Yes" if you prefer both TV and projector to be automatically turned off at the same time. To prevent both
devices to be turned off at the same time, set the setting to "No".
HDMI
Apmlifier
HDMI
DVD Player
51
English
Advertisement
Table of Contents
