Triplett IRTC400 User Manual page 12

Factory Reset
In the menu, short press the Up/Down button to select
Setting, and then short press the OK button to enter the
submenu. In the submenu, short press the Up/ Down button
to select Factory Reset and short press the OK button to
enter the setting interface. Press the OK button select Yes or
No. In this picture, it will jump back to the main interface
when you touch the screen.
USB Communication and PC Analysis Software
1. Please refer to the instructions to download and install the PC
software.
2. Connect the USB data cable to the computer. Users can view
images and analyze data via the PC software.
3. To use the PC software correctly, please read the Software User
Manual.
4. During USB communication, do not directly unplug the USB
cable. If users want to disconnect the device when it has been
successfully connected to the computer, they can select Remove
Device in the lower right corner of the computer.