Hot Tub Settings; Filtration Cycles - HANSCRAFT TP 800 User Manual

Control panel
Navigational buttons serve for the purpose of selecting individual functions. A selected
function is highlighted by a white outline and the text turns white. Once the function is
selected, you can control it by pressing the middle button.
Some functions can have more than one operational mode. The icon will change accor-
ding to the set function mode. Some examples of two-speed circulation pump indicators
are shown below.
If the hot tub has a two-speed circulation pump, the icon will show up to indicate circu-
lation pump's activity. When the heating is on, the circulation pump icon will turn red.
5 3 Settings
Select the settings option by the arrow buttons and confirm the selection by the mid-
dle button. Enter the main settings menu by pressing the right arrow button and now
you can navigate through the menu by up and down arrow buttons.
5 4 Filter
Select the desired function setting option and confirm the selection by pressing the
middle button. Enter the main settings menu by pressing the right arrow button and
now you can navigate through the menu by up and down arrow buttons.
a) Filter 1
Filter is set by a time of their beginning and duration. The display will show an auto-
matically calculated time of the end of the filtration. Set the time of the beginning
and the duration of the cycle.
b) Filter 2
Filter 2 is turned off by default. If you wish to turn it on, select the filter 2 option and
turn it on or off by the right arrow button.
Set the filters so that one runs in the morning and the second in the afternoon, at
least for 2 hours each, depending on the quality of the water and frequency of
use of the hot tub.
8
jets are
turned off
jets are
running on
a low speed
jets are
running on
a high speed