Saeco Gran Baristo HD8965 User Manual page 66

ENGLISH
64
11 Make sure the brew group is in the off position; the two reference signs
must match. If they do not match, proceed as described in steps (12
and 13).
12
Turn the brew group back to the off position by manually turning the
pin on the base, as shown in this fi gure. Turn it until it locks into the
position described in the following step.
13
When you reach the position shown in this fi gure, check that the two
reference signs match and that the brew group is locked into position.
14
Insert the brew group in its seat again by sliding it along the guides
until it locks into place.
15
Close the brew group locking lever to lock it into position.