Table of Contents
Advertisement
Lenovo Moto G Power
Level 2 – Service and Repair Manual
4.
Vacuum Pick-Up Tool will be used in the
next step to fix the position of Fingerprint
Sensor. Please refer below steps for details.
5.
Select the middle size of the cap and
assemble the tool as shown.
6.
Put spring into needle before putting cap on
the fore end of needle sucker for avoiding
needle passing through.
7.
Use fingers to press the air bladder of the
tool to exhaust the air as shown.
PAGE 116
Lenovo Confidential Restricted:
Do not share without consent from Lenovo
Advertisement
Table of Contents
