1. Coolant reservoir cap
2. Maximum level mark
3. Minimum level mark
4. If the coolant is at or below the minimum
level mark, remove the coolant reservoir
cap and add coolant to the maximum lev-
el mark.
5. Install the reservoir cap.
To change the coolant
1. Park the vehicle on a level surface.
2. Remove the hood. (See page 8-10.)
3. When the engine is cool, remove the radi-
ator cap. WARNING! Never attempt to
1
remove the radiator cap when the en-
gine is hot.
2
3
1. Radiator cap
4. Place a container under the engine to col-
lect the used coolant.
5. Remove the coolant drain bolt. Discard
the used gasket.
8-26
[EWB04250]
1
8