Table of Contents
Advertisement
About your projector
Remote control
Front
1
2
3
4
5
6
7
8
9
10
11
Power < v / b > button
1
Sets the projector to the state where the projector is turned
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in projection mode.
Sets the projector to projection mode when the power is switched
off (standby mode).
2
Remote control indicator
Blinks if any button in the remote control is pressed.
Lens buttons (<FOCUS>, <SHIFT>)
3
Adjusts the projection lens. ( x page 52)
The <ZOOM> button is not used with the projector.
<MENU> button/<RETURN> button/<ENTER> button/ asqw
4
buttons
Used to navigate through the menu screen. ( x page 61)
asqw buttons are also used to enter the password in
[SECURITY] or enter characters.
5
<VOL-> button/<VOL+> button
Adjusts the volume of audio output. ( x page 55)
6
<DEFAULT> button
Resets the content of the sub-menu to the factory default.
( x page 62)
Input selection buttons (<HDMI 1>, <HDMI 2>, <DIGITAL
7
LINK>, <COMPUTER 1>, <COMPUTER 2>, <VIDEO>)
Switches the input signal to project. ( x page 50)
8
Number (<0> - <9>) buttons
Used for entering an ID number or a password in a multiple
projector environment.
9
<ON SCREEN> button
Switches the on-screen display function on (display) or off (hide).
( x page 55)
10 <ID ALL> button
Used to simultaneously control all the projectors with a single
remote control in a multiple projector environment. ( x page 28)
11 <ECO> button
Displays the setting screen relating to ECO management. ( x
pages 58, 98)
24 - ENGLISH
Chapter 1 Preparation — About your projector
12
5
13
16
17
18
14
19
15
20
21
22
12 <AUTO SETUP> button
Automatically adjusts the image display position while projecting
the image.
[PROGRESS] is displayed while in automatic adjustment.
( x page 55)
13 <FUNCTION> button
Assigns a frequently used operation as a shortcut button.
( x page 57)
14 <TEST PATTERN> button
Displays the test pattern. ( x page 57)
15 <ID SET> button
Sets the ID number of the remote control in a multiple projector
environment. ( x page 28)
16 <SCREEN ADJ> button
Used to correct the distortion of the projected image. ( x pages
56, 74)
17 <FREEZE> button
Used when pausing the image and turning off the audio.
( x page 55)
18 <CEC> button
Displays the HDMI-CEC operation screen. ( x page 117)
19 <STATUS> button
Displays the projector information.
20 <SHUTTER> button
Used when temporarily turning off the image and audio.
( x page 54)
21 <MUTE> button
Used when temporarily turning off the audio. ( x page 54)
22 <ASPECT> button
Switches the aspect ratio of the image. ( x page 57)
23 Remote control signal transmitter
24 (Not available with this projector)
Top
23
Bottom
24
Advertisement
Table of Contents
