Table of Contents
Advertisement
4.0 RUNNING CHASES
You must program scenes before you can run chases.
4.1 MANUAL MODE
4.2 AUTO MODE
5.1 IMPLEMENTATION
This unit receives Note On signals, which enables to run 15 banks(01-15) of scenes and 6 chases of scenes. In
addition, blackout function can be activated by MIDI signal.
Bank
Bank 1
Bank 2
Bank 3
.............
Bank 14
Bank 15
Chase 1
Chase 2
Chase 3
Chase 4
Chase 5
Chase 6
1. When the power is turned on, this unit enters Manual mode automatically.
2. Select your desired chase by tapping one of the six Chase buttons. A second tap of this
button will deactivate this function.
3. Use the Speed slider(or Tap Sync button) and Fade Time slider to adjust the current
scenes to your desired effects.
4. Use the Bank Up/Down button to scroll through the chase to run all banks of scenes.
1. Tap the Auto/Del button to activate Auto mode. The auto LED lights indicating music
mode is active.
2. Select your desired chase by tapping one of the six Chase buttons. A second tap of this
button will deactivate this function.
3. Use the Speed slider (or Tap Sync) and Fade Time slider to adjust the chase to your
desired effects. You may select several chases at a time, the chases will run in sequence
that you select the chases.
Note number
00 to 07
08 to 15
16 to 23
..............
104 to 111
112 to 119
120
121
122
123
124
125
126
Function
Turn on or off scenes 1 – 8 of bank 1
Turn on or off scenes 1 – 8 of bank 2
Turn on or off scenes 1 – 8 of bank 3
..............
Turn on or off scenes 1 – 8 of bank 14
Turn on or off scenes 1 – 8 of bank 15
Turn on or off Chase 1
Turn on or off Chase 2
Turn on or off Chase 3
Turn on or off Chase 4
Turn on or off Chase 5
Turn on or off Chase 6
Blackout
13
Advertisement
Table of Contents
