Music Mode - Beamz 154.060 Instruction Manual

2. Use the Bank Up/Down button to select a bank of scenes to run.
3. After selecting the bank of scenes you wish to run, you can use the Speed slider (or Tap
Sync/ Display button) and Fade Time slider to adjust the scenes to your desired effect.
Hints:
The Tap Sync button is used to set the speed by tapping the button several times, the last
two taps will define the speed with a maximum of 10 minutes. Tap Sync will override any
previous setting of the Speed slider unless the slider is moved again.
4. Tap the Auto/Del button again to exit Auto mode.

3.3 MUSIC MODE

1. Tap the Music/Bank Copy button to activate Music mode. The music LED lights indicating
music mode is active.
2. Use the Bank Up/Down button to select the bank that holds the scenes you wish to run.
The scenes you've selected will chase in a sequential order according to the music rhythms
detected by the built-in microphone.
3. Tap the Music/Bank Copy button again to exit Music mode.
12