Editing the Song
Here's how to edit a song that you recorded.
Specifying the Sound Engine Played
by Each Track
You can specify the output destination of each track. This lets you
play back a song using an external sound module in addition to the
FA's internal sound engine.
1.
In the SEQUENCER screen (p . 59), hold down the
button and press the
[3] (Song Util)
2.
Move the cursor to
"Track Settings"
(Select)
button .
3.
Use the cursor
[
] [
]
the settings .
Value
Explanation
INT
The internal sound engine of the FA is played.
An external sound module connected to the MIDI
EXT
OUT connector is played.
Both the internal sound engine and the external
BOTH
sound module are played.
OFF
The track does not output data.
4.
Press the
[7] (Exit)
button .
Muting a Part's Performance (MUTE)
When playing a song, you can mute (silence) the performance of a
specific part.
1.
Access the SEQUENCER screen (p . 59) .
2.
Use the cursor buttons to move the cursor to
the track that you want to mute .
3.
Use the dial or the
[DEC] [INC]
off .
MEMO
You can use the pads to turn Mute on/off (p. 84).
[SHIFT]
button .
and press the
[7]
buttons and the dial to change
"MUTE"
buttons to turn Mute on/
Sounding One Part by Itself (SOLO)
When playing back a song, here's how you can listen to the current
part (the currently selected part) by itself.
1.
Access the SEQUENCER screen (p . 59) .
2.
Use the cursor buttons to move the cursor to
the track that you want to solo .
3.
Use the dial or the
MEMO
You can use the pads to turn Solo on/off (p. 84).
of
"SOLO"
[DEC] [INC]
buttons to turn Solo on/off .
of
63