Program Editor - Casio FA-123 User Manual

8. Program Editor

The program editor lets you edit the contents of programs.
k k k k k Launching the Program Editor
Create a new program or select an existing program to launch the program editor.
u u u u u Command Input
You can input commands using any one of the three following methods.
• Selecting command from one of the following menus: MENU, PRGM, VARS, OPTN,
• Inputting commands from the keyboard.
• Displaying the calculator window and using the mouse to click on its keys.
k k k k k Saving Programs
Use the following procedure to save a program after inputting or editing it.
1. Select File-Close to quit the program editor.
2. Select File-Save to save the catalog file.
k k k k k Changing Fonts (Macintosh Only)
You can use another font with the program editor besides the FA123GRF font and
FA123ALG font.
KEY, SET UP, CATALOG
• To display the calculator window, select View-Calculator . Select View-Calculator
again to clear the calculator from the display.
• The calculator independent font (i.e.
FA123ALG font, and cannot be input from the keyboard.
• Special characters will not appear normally on the display if the FA123GRF font
and FA123ALG font is not installed correctly.
• The calculation window's SHIFT key and ALPHA key are disabled in the case of
a Macintosh.
• Special characters will not appear normally on the screen whenever you use a
font other than FA123GRF and FA123ALG.
Select Edit-Font-font name to change the font.
3
) is included in the FA123GRF font and
19