Colors Are Uneven Or Streaked; Printing Stops Before It Is Completed - Canon PIXMA mini260 Photo Printing Manual

Cause
Media Type setting in the
Operation Panel does not
match the actual type of paper.

Colors Are Uneven or Streaked

Cause
Print quality is not set
appropriately.
Printer Does Not Start or Stops During Print Jobs
Printing Does Not Start
Cause
Ink tank is empty.
Ink tank is not installed
securely.

Printing Stops Before It Is Completed

Cause
Out of paper
66 Troubleshooting
Check that the Media Type set in the Operation Panel matches
the type of the loaded printing paper.
If you notice abrasion even with the media type set correctly to
match the loaded paper, set the Paper Thickness Lever to the
right.
In the Operation Panel, set Print quality to High (quality-
priority).
Especially when printing a document that requires a lot of ink,
increasing the Print Quality setting is effective in reducing
uneven colors.
An ink tank is not installed properly, or is out of ink.
Confirm the error message displayed on the LCD and take the
appropriate action to resolve the error.
If the ink lamp is not lit, press the
clicks into place. The ink lamp lights up red when the ink tank is
fully inserted.
Make sure that paper is loaded. If paper has run out, load paper.
Action
Action
Action
mark on the ink tank until it
Action