Paper Jams - Canon PIXMA mini260 Photo Printing Manual

Canon pixma mini260: printing guide
Hide thumbs Also See for PIXMA mini260:
Table of Contents

Advertisement

Paper Jams

Cause
Paper jammed in the Paper
Output Slot or the Auto Sheet
Feeder.
Landscape credit card-sized
paper jammed inside the
printer.
68
Troubleshooting
Remove the paper following the procedure below.
(1) Slowly pull the paper out, either from the Auto Sheet Feeder
or from the Paper Output Slot, whichever is easier.
If the paper tears and a piece remains inside the printer, open the
Printer Cover and remove it.
After removing all paper, close the Printer Cover, turn the printer
off, and turn it back on.
Be careful not to touch the components inside the printer.
If you cannot pull the paper out, turn the printer off and turn it back
on. The paper will be ejected automatically.
(2) Reload the paper in the printer, and press the OK button on
the printer.
If you turned off the printer in step 1, all print jobs in queue
are canceled. Reprint if necessary.
Note
For details on how to load paper, see "Loading Printing Paper" on
page 11.
When reloading the paper in the printer, see "Paper Does Not
Feed Properly" on page 67 to confirm that you are using the
correct paper and are loading it into the printer correctly.
If you cannot remove the paper or the paper tears inside the
printer, or if the paper jam error continues after removing the
paper, contact your Canon Service representative.
Do not load credit card-sized paper in the landscape orientation.
Remove the paper following the procedure below.
(1) Load a single sheet of the paper in the Auto Sheet Feeder in
portrait orientation.
Do not load it in the landscape orientation.
(2) Start printing.
The paper is fed and then pushes out the jammed paper as it
ejects.
If you cannot remove the jammed paper, contact your Canon
Service representative.
Action

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pixma mini 260

Table of Contents