Download Print this page

Advertisement

Quick Links

INSTALLATION INFORMATION
EMG MODELS: 35P4-X, 35P4A-X (4-STRING)
35P5-X (NARROW 5-STRING)
35J-X, 35JA-X (4-STRING OR NARROW 5-STRING)
SPECIFICATIONS:
Logo Color
Magnet Type *
Resonant Frequency (KHz)
Output Voltage (Finger, Thumb)
Output Voltage (Thump)
Output Noise (60 Hz)
Output Impedance (Kohm)
Current @9V (Microamps)
Battery Life (Hours)
Maximum Supply (Volts DC)
*Note: Magnet Type: A (Alnico) C (Ceramic) C/S (Ceramic and Steel)
PICKUP AND MAGNET DIMENSIONS:
All EMG-35-X Models have the same housing dimensions (shown above).
The differences in each of the models are in the magnet widths and type. The drawings below show the magnet placement for all versions,
4-string and for a narrow 5-string bass. You should check the width of your strings against the magnet dimensions below to make sure there
is sufficient string coverage. A rule of thumb for any pickup is that the total magnet width should be the string width plus twice the distance
the pickup is from the strings. So, If the pickup is 3/16" (5mm) from the strings, with a magnet width of 2.90" (73.5mm) the maximum string width
would be 2.50" (64mm). If your string width is too wide for the pickups shown below, choose one of the EMG-40 Extended Series Pickups, with a
4 inch (101mm) housing, where similar styles of EMG pickups are available.
MAXIMUM RECOMMENDED STRING WIDTH 2.50"
MAXIMUM RECOMMENDED STRING WIDTH 2.50"
Warranty
All EMG Pickups and accessories are warranted for a period of two years. This warranty does not cover failure due to improper installation, abuse or damage. If
upon examination the pickup is determined to be defective, a replacement will be made. Warranty replacement products are covered by this same warranty. This
warranty covers only those pickups and accessories sold by authorized EMG Dealers. This warranty is not transferable.
© 2009 Copyright EMG INC. All Rights Reserved.
35P4-X
35P4A-X
Silver
Gold
C
A
3.20
2.61
2.00
2.00
8.50
8.50
-106
-101
2.00
2.00
80
80
3000
3000
27
27
EMG-35P4-X / 35P4A-X
1.200
1.200
EMG-35J-X / JA-X
2.900
.125 DIA. MOUNTING HOLES
.750
MODEL:
35J-X
35JA-X
Silver
Gold
C
A
4.05
3.20
2.00
1.50
8.00
6.50
-105
-101
2.00
2.00
80
80
3000
3000
27
27
EMG-35P5-X
1.650
MAXIMUM RECOMMENDED STRING WIDTH 2.50"
EMG-35CS-X/DC-X
2.900
MAXIMUM RECOMMENDED STRING WIDTH 2.50"
3.500
3.250
35P5-X
35CS-X
Silver
Silver
C
C/S
3.20
2.50
2.00
2.00
8.50
8.50
-106
-109
2.00
2.00
80
80
3000
3000
27
27
1.200
R .125
TYP
1.500
.880
35DC-X
Silver
C
3.50
2.00
8.50
-107
2.00
80
3000
27

Advertisement

loading

Summary of Contents for EMG 35P4-X

  • Page 1 Warranty All EMG Pickups and accessories are warranted for a period of two years. This warranty does not cover failure due to improper installation, abuse or damage. If upon examination the pickup is determined to be defective, a replacement will be made. Warranty replacement products are covered by this same warranty. This warranty covers only those pickups and accessories sold by authorized EMG Dealers.
  • Page 2 2) Power Supply tips are on page 4. If your instrument has a battery holder, of the pickup as shown above. you are installing this pickup with an older EMG, or you want to supply your Note the orientation arrow.
  • Page 3 (remember the order and function of each control) Control. 4) Install the EMG Volume and Tone Controls and tighten them in. 4) Install the EMG Volume and Tone Controls and tighten them in. 4) Plug a coax cable from the Bridge Volume control the VLPF Master Tone control.
  • Page 4 Soldering to the battery buss: If your instrument has a long Panel Jack like the one below If your instrument has an older EMG Pickup you can solder the you will have to solder the output cable as shown. pickup RED wire to the buss. Simply use some needle nose pliers,...

This manual is also suitable for:

X series35p4a-x35j-x35ja-x35p5-x35cs-x ... Show all