Installing And Operating Your Fridge - SchaubLorenz SLUS435X3M User Manual

BEFORE USING THE APPLIANCE

Installing and operating your fridge

Before starting to use your fridge, you should pay attention to the
following points:
• The operating voltage for your fridge is 220-240 V at 50Hz.
• We do not accept responsibility for any damages that occur
due to ungrounded usage.
• Place your fridge where it will not be exposed to direct sunlight.
• Your appliance should be at least 50 cm away from stoves,
gas ovens and heater cores, and at least 5 cm away from
electrical ovens.
• Your fridge should never be used outdoors or exposed to rain.
• When your fridge is placed next to a deep freezer, there
should be at least 2 cm between them to prevent humidity
forming on the outer surface.
• Do not place anything on your fridge, and install your fridge
in a suitable place so that at least 15 cm of free space is
available above it.
• Use the adjustable front legs to make sure your appliance is
level and stable. You can adjust the legs by turning them in
either direction. This should be done before placing food in
the fridge.
• Before using
solution of warm water and a teaspoon of sodium
bicarbonate,
Place all parts in the fridge after cleaning.
If your refrigerator has a fan condenser:
The condenser of your fridge is placed at the bottom of cabinet. As a
result of that, fittings which control the distance between the refrigerator
and the back wall at where you place the fridge, exist at the cover of
the bottom of cabinet. You can move the fridge towards the back wall
until that point.
Plastic for distance setting
your fridge,
then rinse with
wipe all parts
clean water
with a
and dry.
EN
7