Installing And Operating Your Fridge; Before Using Your Fridge - SchaubLorenz SLS E136W0M User Manual

Installing and operating your fridge

Before starting to use your fridge, you should pay attention to the following points:
• The operating voltage for your fridge is 220-240 V at 50Hz.
• The plug must be accessible after installation.
the smell will fade away when your fridge starts to cool.
(voltage and connected load) matches that of the mains electricity supply. If in doubt,
electrician for assistance.
• The appliance must be connected with a properly installed fused socket. Power supply
(AC) and voltage at the operating point must match with the details on the name plate
of the appliance (name plate is located on the inside left of the appliance).
• Your fridge may have a smell when it is operated for the first time. This is normal and
• We do not accept responsibility for any damages that occur due to ungrounded usage.
• Before connecting your Fridge Freezer, ensure that the information on the data plate
consult a qualified electrician.
• Your appliance should be at least 50 cm away from stoves, gas ovens and heater
• Insert the plug into a socket with an efficient ground connection. If the socket has no
cores, and at least 5 cm away from electrical ovens.
ground contact or the plug does not match, we recommend that you consult a qualified
at least 2 cm between them to prevent humidity forming on the outer
surface.
• Do not place heavy items on the appliance.
• Clean the appliance thoroughly, especially the interior, before use (see
Cleaning and Maintenance).
• Place your fridge where it will not be exposed to direct sunlight.
• The installation procedure into the kitchen unit is given in the Installation Manual. This
• Your fridge should never be used outdoors or exposed to rain.
product is intended to be used in proper kitchen units only.
• Before using your fridge, wipe all parts with a solution of warm water and a teaspoon
of sodium bicarbonate, then rinse with clean water and dry.

Before using your fridge

• When your fridge is placed next to a deep freezer, there should be
Place all parts in the fridge after cleaning.
in an upright position for at least 3 hours before plugging into the mains.
is normal and the smell will fade away when your fridge starts to
• When using your fridge for the first time, or after transportation, keep it
This allows efficient operation and prevents damage to the compressor.
• Your fridge may have a smell when it is operated for the first time. This
EN -6-
cool.