Advertisement
Specifications
Yorkminster SE
PERFORMANCE
Recommended amplifier power
Continuous power handling
Frequency response
Sensitivity
Nominal impedance
DRIVE UNITS
Dual Concentric™ high frequency
Dual Concentric™ low frequency
Dispersion
CROSSOVER
Frequency
Type
Adjustment
CONSTRUCTION
Enclosure type
Volume
Dimensions
Weight
Finish
50 - 250 Watts
150 Watts RMS
23Hz - 22kHz -6dB
95dB (2.83 Volts @ 1 metre)
8 Ohms
51mm (2.00") with aluminium alloy dome, Alnico magnet
system with Pepperpot Waveguide™
300mm (12.00") treated paper pulp cone with HE twin roll
fabric surround. 52mm (2.00") round wire wound voice coil
90 degrees conical
1.1kHz
Bi-wired, hard wired passive, low loss time compensated
2nd order LF, 2nd order compensated HF.
+/- 3dB over 1kHz to 22kHz shelving,
+2dB to –6dB per octave over 5kHz to
22kHz slope
Twin rear ported
200L (7 cu.ft)
1080x 620 x 447mm
(42.50 x 24.50 x 17.50")
61.5kg (135.6 lbs)
Lacquered teak veneer with solid teak trim detail
Page 3
Advertisement
