Summary of Contents for Vendors Exchange VE1020579
Page 1
QUICK REFERENCE GUIDE GEAR DRIVE ASSEMBLY KIT INSTRUCTIONS AP Dual Drive Tray − Kit No. VE1020579 (4 Wide) AP Dual Drive Tray − Kit No. VE1020580 (5 Wide) DESCRIPTION PART NUMBER VE2995 VEND MOTOR VE9323B SELF DRILLING SCREW GEAR SET WITH...
Page 2
QUICK REFERENCE GUIDE GEAR DRIVE ASSEMBLY KIT INSTRUCTIONS AP Dual Drive Tray − Kit No. VE1020579 (4 Wide) − VE1020580 (5 Wide) Before Install After Install Vend Motor Screw Thru Self Drill Screw Self Drill Screw Slots on Tray Motor Wall First, insert Backing Plate with Gears (VE106272) into the slots in the tray motor slot as shown (A).
Page 3
QUICK REFERENCE GUIDE GEAR DRIVE ASSEMBLY KIT INSTRUCTIONS AP Dual Drive Tray − Kit No. VE1020579 (4 Wide) − VE1020580 (5 Wide) Installed Coil Install Coil End of Left Coil Then, install the left coil. Rotate the coil so that the end is at the 6-o’clock position at the end of the install.
Page 4
QUICK REFERENCE GUIDE GEAR DRIVE ASSEMBLY KIT INSTRUCTIONS AP Dual Drive Tray − Kit No. VE1020579 (4 Wide) − VE1020580 (5 Wide) Loose Gear/Hub Snaps on Motor Detail of Motor Hub Tabs Right Coil Then, install the Right Side Coil and the Gear/Hub...
Page 5
QUICK REFERENCE GUIDE GEAR DRIVE ASSEMBLY KIT INSTRUCTIONS AP Dual Drive Tray − Kit No. VE1020579 (4 Wide) − VE1020580 (5 Wide) Finally, repeat steps 2 through 4 to complete the Coil Installation. Check the ends to main- tain the 6-o’clock position on each one, adjust if necessary www.veii.com...