R
Loose Gear/Hub
Right Coil
3
Next, install the Right Coil to the Loose
Gear/Hub.
VE1020573, REVISION A
GEAR DRIVE ASSEMBLY KIT INSTRUCTIONS
AP Dual Drive Tray − Kit No. VE1020579 (4 Wide) − VE1020580 (5 Wide)
12
6
4
6-o'clock position
www.veii.com
1-800-321-2311
QUICK REFERENCE GUIDE
Snaps on Motor
Detail of Motor
4
Then, install the Right Side Coil and the Gear/Hub
on the Motor Hub position as shown in the detail
above, making sure that the snaps on the Motor
Hub fully engage into the recessed area on the
Gear/Hub and the end of the Coil should end at the
6-o'clock position (see symbol).
8700 BROOKPARK ROAD
CLEVELAND, OH 44129
©2021, VENDORS EXCHANGE® INTERNATIONAL, USA
Hub Tabs