Table of Contents
Advertisement
LED Behavior
LED
SFP
WAN/LAN LEDs
Bluetooth LED
Control Button Usage
Button
Reset/Default Button
Bluetooth Button
FortiExtender-311F&312F-QuickStart.indd 7
FortiExtender-311F&312F-QuickStart.indd 7
Behavior and Description
•
Green Steady: 1 G network connected.
•
Green Flashing: 1 G network activity.
•
OFF: No network connection.
•
Green Steady: 1 G network connected.
•
Green Flashing: 1 G network activity.
•
Amber Steady: 100 M network connected.
•
Amber Flashing: 100 M network activity.
•
Off: No network connection.
•
Green Steady: The Bluetooth configuration window is open.
(See Bluetooth Button below)
•
Blue Flashing: Bluetooth configuration is in progress.
•
Blue Steady: Bluetooth configuration is completed. The LED
turns off in 5 seconds.
•
Off: No Bluetooth configuration is allowed.
Operating Instructions
•
Press and hold for less than 5 seconds: Reset/Reboot the
device.
•
Press and hold for more than 5 seconds: Restore the
device to its factory default settings.
•
Press and hold for less than five (5) seconds: Ignored.
•
Press and hold for more than five (5) seconds: Opens a
window (period of time) for Bluetooth configuration, and
turns on the Bluetooth LED. Note: The "window" closes
if no Bluetooth configuration activity occurs within 30
seconds. Re-pressing the button has no effect while
Bluetooth configuration is in progress or if it is completed
within five (5) minutes.
7
6/1/2021 4:22:40 PM
6/1/2021 4:22:40 PM
Advertisement
Table of Contents
