Led Behavior - Fortinet FortiExtender 201E Quick Start Manual

Ports, LEDs, and Buttons
USB 2.0 RJ45 Network LEDs
Console Port
Note: To access the device from its console port,
you must set the baud rate to 115200.
Kensington Lock Slot
Reset/Default Button
6
GE WAN and LAN (1–4) Ports. Port 4 is PoE PD
LAN (802.3af/at compatible).
12V/2A Input (optional)
(Use 12V/2A power adapter
with ID 2.1 mm plug.)
Bluetooth LED
Bluetooth Button

LED Behavior

LED Behavior and Description
RJ45 Network LEDs Green Steady: 1G network connected.
Green Flashing: 1G network activity.
Amber Steady: 100M network connected.
Amber Flashing: 100M network activity.
Off: No network connection.
Bluetooth LED Green Steady: The Bluetooth configuration window is open.
Blue Flashing: Bluetooth configuration is in progress.
Blue Steady: Bluetooth configuration is completed. The LED
turns off in 5 seconds.
Off: No Bluetooth configuration is allowed.
Control Button Usage
Button Operating Instructions
Reset/Default Button Press and hold for less than 5 seconds: Reset/Reboot the
device.
Press and hold for more than 5 seconds: Restore the
device to its factory default settings.
Bluetooth Button Press and hold for less than 3 seconds: Ignored.
Press and hold for more than 3 seconds: Opens a
window (period) of time for Bluetooth configuration, and
turns on the Bluetooth LED. Note: The "window" closes if
no Bluetooth configuration activity occurs within 30 seconds.
Re-pressing the button has no effect while Bluetooth
configuration is in progress or if it is completed within 5
minutes.
7