Table of Contents
Advertisement
Screen displays (continued)
• The AWB error message (LOW LIGHT /
LEVEL OVER) is displayed. (Page E-42 of
Vol.1)
• The functions allocated to the USER buttons
are displayed while you hold down the DISP/
MODE CHK button.
6 Microphone level automatic control display
Appears when in the setup menus,
RECORDING SETUP screen, MIC ALC, you
have selected "ON".
7 Marker luminance display
When markers are displayed, the brightness
level around the center of the screen is
indicated as 0% to 99%. "99%↑" appears if the
percentage is over 99.
• When the AREA Y-GET function is operating,
the brightness level around the center of the
AREA frame is displayed.
8 Date and time display
mmm dd yyyy hh:mm:ss
Order can be changed with the DATE FORMAT
item on the setup menu DISPLAY SETUP
screen.
9 Frame rate display
Displays recording frame rate.
Not displayed when set to 1080/60i.
10 Shutter speed display
The shutter speed is displayed here.
11 Audio level meter display (Page 18)
12 Auto iris control display
STD:
Standard auto-iris control
SPOT: Auto iris control for spotlight
BACK: Auto iris control for backlight
compensation
13 Iris display
Displays F value. The STEP of the display
value differs depending on the lens.
46
Month
Day of the month
Year:
2001 - 2039
Hours
Minutes
Seconds
14 Zoom position display
The zoom poison is displayed with Z00
(maximum wide-angle) - Z99 (maximum zoom).
The unit can be switched to mm in the ZOOM
& FOCUS item of the setting menu DISPLAY
SETUP screen.
The focus position display does not move linearly.
The unit is set as mm in the factory settings.
15 Focus control information display
Displays the focus control information with 99 - 00.
In the auto focus mode, AF appears. In the manual
focus mode, MF appears.
The units can be switched between feet and
m in the ZOOM & FOCUS item of the setting
menu DISPLAY SETUP screen.
The STEP of the display value differs
depending on the lens. The unit is set as m in
the factory settings.
16 ND filter display
ND filter selected is displayed.
17 Gain display
Displays the gain value of the image amplifier
configured. (During the auto mode, AGC is
displayed.)
18 AWB information display
Displays the information of white balance.
ATW:
When ATW is set
P3.2K/P5.6K/VAR: In the case of preset
Ach/Bch:
In the case of A/B
LOCK:
When ATW is locked
19 Marker display
During shooting, pressing the ZEBRA button
once or twice will display the marker.
20 Optical Image Stabilizer
Displayed when Optical Image Stabilizer is ON.
21 Scene filename display (Page 19)
22 Remaining battery capacity display
When using Panasonic-manufactured batteries
compatible with this product, the remaining
battery capacity is displayed in minutes.
Time remaining will be displayed after a brief
pause.
• The battery display will change
→
→
as battery capacity decreases.
flashes in red when less than 3 minutes of
battery life is remaining, and
when the battery is exhausted.
(Continued on the next page)
display
→
→
flashes
Advertisement
Table of Contents
