Omron 5 Series Instruction Manual page 26

3. Press the [START/STOP] button to turn your monitor off.
Note
• Your monitor automatically turns off after 2 minutes.
• Wait 2 - 3 minutes between measurements. The wait time allows the
arteries to decompress and return to their pre-measurement state.
You may need to increase the wait time depending on your
individual physiological characteristics.
 Using the Guest Mode
The monitor stores measurement values for 2 users in the memory.
The guest mode can be used to take a single measurement for another
user.
Note
• No readings are stored in the memory.
1. Press and hold the [START/STOP] button for
more than 2 seconds.
The user ID symbol and date/time display will
disappear.
2. Release the [START/STOP] button when the user ID and date/
time display turn off.
The arm cuff automatically starts to inflate.
26