Isotra VERANDA HRV80-ZIP Measurement And Assembly Manual

VERANDA HRV80-ZIP
WARNINGS
Installation must be carried out by qualified personnel in compliance with EN and local safety regulations relating to
domestic electrical systems.
See also product technical data document.
Consult these instructions before you start using this product.
The tightening of springs creates significant forces. Be very careful and ensure solid footing whilst operating.
Provide sufficient light in the installation area. Remove obstacles and dirt. Make sure that, except for the fitters, no
other people are present in the installation area. Unauthorised persons might be in the way, thus jeopardising
themselves and others.
This symbol indicates the possibility of injury to persons or damage to the product.
This symbol denotes a warning.
This symbol means it is necessary to use force during the operation shown.
Use electric screwdrivers set the correct torque value.
This symbol indicates the need of a visual control.
This symbol indicates an optional element.
The manufacturer accepts no liability for any inaccuracies or printing errors that may be contained in this manual. The
manufacturer reserves the right to introduce any modifications to the product that are considered necessary or in the
interests of the user and which do not alter the essential operational and safety characteristics of the appliance. No
modification of the design or configuration may be carried out without first consulting the manufacturer. The end user
must receive the product's operation instructions.
Document validity: 23.5.2019
.05.2019
MEASUREMENT AND ASSEMBLY MANUAL
1