Isotra VERANDA HRV80-ZIP Manual

VERANDA HRV80-ZIP
ALERTS AND WARNINGS
Installation must be performed by qualified personnel in accordance with EN and locally applicable safety regulations on
electrical systems for households.
See also the document with the product technical data.
Study this manual in detail before utilising the product.
The stretching of springs creates considerable forces. Be very careful and stand on a firm surface during the work.
Ensure good lighting of the assembly area. Remove obstacles and impurities. Ensure that no other persons except the
fitters are present in the work area. Unauthorised persons are likely to get in the way and endanger themselves and
other people.
This symbol indicates the possibility of personal injury or damage to the product.
This symbol indicates warning.
This symbol indicates that force must be used during the activity.
Only use electric screwdrivers with the proper tightening torque set.
This symbol indicates the need of visual check.
This symbol indicates an optional element.
The manufacturer does not accept any responsibility for any inaccuracies or typographical errors that may be found in
this manual. The manufacturer reserves a right to carry out alterations of the product which it deems necessary or in
the user's interest and which do not change the basic operating and safety characteristics of the device. It is forbidden
to make changes of any kind to the design or configuration without prior consultation with the manufacturer. The end
user must receive operating instruction for the product.
Manual validity: 10.10.2023
MEASUREMENT AND INSTALLATION MANUAL
1