Boss Audio Systems 765DBI User Manual page 9

Bluetooth-enabled solid state mp3-compatible in-dash receiver with built-in ipod docking station with usb and sd memory card ports and front panel aux input
Table of Contents

Advertisement

REMOVE iPod FROM THE BUILT-IN iPod DOCKING
To take out the iPod from the docking station, user can first detach the front panel, and repeat step
1 to step 8 to take out the iPod & return the iPod docking inside the unit's cabinent.
Step 1
Press the button as indicated below
to unlock the iPod docking.
Step 2
Pull out the iPod docking
as shown below.
Step 3
Press on these buttons
on both sides as
indicated below to unlock
the iPod holder.
Step 4
Pull out the iPod connected
as indicated below
by pulling out the stick.
Press down
Pull out
Never pull out this stick unless
docking is release out.
Press down this button
Pull out this stick
Step 5
Once the stick with the
connected iPod is completely
out, user should push on
the locking buttons
on the both sides
of the iPod
connector to
release the
iPod as
indicated in the
picture, and remove the iPod unit.
Step 6
Once the iPod unit is remove,
push the stick backward
into the iPod docking
station until it stops.
Step 7
Push on the iPod holders on both
sides until they stop.
P ress towards the iPod unit to hold the
i P od unit firmly in place
Step 8
Push the iPod docking inwards into
the unit's cabinent until a click sound
is heard.
8
Press toward this
lock switch
Push inwards
Push the docking back
to Cabinent

Advertisement

Table of Contents
loading

Table of Contents