Cleaning And Care - Maxwell VT-8432 CM Instruction Manual

•
Comb your hair thoroughly before curling and divide it into
locks not wider than 3-5 cm each.
•
Press the clamp handle (4), place the end of the lock under
the clamp (3), release the handle (4) and wrap the hair
around the outer surface. Wait for 15-20 seconds (depend-
ing on your hair type), then uncurl the lock and release it
from the clamp (3).
•
Repeat this procedure on the rest of your hair.
•
Avoid contact of heated surfaces with your face, neck and
other parts of your body.
•
Do not comb your hair right after curling, let the locks cool
off. Divide the locks with your fingers to make them look
naturally.
•
After using switch the unit off by pressing the button (7),
unplug it and let the unit cool down.
Using the attachments (10)
•
Make sure that the heating plates of the unit have cooled
down.
•
Match the ledges on the attachments (10) with the grooves
on the heating plates (2) and push the attachments (10)
towards the handles until bumping.
•
Insert the power plug into the socket and switch the unit on
with the switch (7), set the required temperature with the
buttons (6) and let the unit heat up.
•
Comb your hair thoroughly before curling and divide it into
locks not wider than 3-5 cm each.
•
Open the hair straightener moving clamp (9).
•
Place the lock end between the heating plates (2) and press
them together, wrap the hair around the outer surface of the
attachments (10). Wait for 15-20 seconds (depending on
your hair type), then uncurl the lock.
Note: when wrapping your hair around the attachments (10)
you can press the heating plates (2) taking them by the tips (1).
•
Repeat this procedure on the rest of your hair.
•
After using switch the unit off by pressing the button (7),
unplug it and let the unit cool down.

CLEANING AND CARE

•
Before cleaning, unplug the unit and let it cool down com-
pletely.
•
Never immerse the unit into water or other liquids.
•
Wipe the unit body with a soft slightly damp cloth and then
dry the unit body.
•
Do not use steam cleaners.
•
Do not use abrasives and solvents to clean the unit.
ENGLISH
7
12.01.2017 9:27:28