Safety Measures - Maxwell VT-8432 CM Instruction Manual

MULTISTYLER VT-8432 CM
A versatile 2-in-1 unit is intended for both straightening and
curling of slightly wet and dry hair.
DESCRIPTION
Heating plates tips
1.
Heating plates
2.
Clamp
3.
Clamp handle
4.
Heating plates temperature indicators
5.
Heating temperature setting buttons
6.
ON/OFF button
7.
Hanging loop
8.
Heating plates lock
9.
Additional attachments for voluminous locks
10.
ATTENTION!
Do not use this unit near containers filled with water (such
as a sink, bath etc.).
•
When using the unit in a bathroom, unplug it right after usage
by taking the power plug out of the mains socket, as close-
ness of water is dangerous even if the unit is switched off.
•
For additional protection you can install a residual current
device (RCD) with nominal operation current not exceed-
ing 30 mA into the bathroom mains; contact a specialist
for installation.
•
Place the hair straightener on a flat steady heat-resistant
surface. Make sure that the heating plates and outer oper-
ating surfaces do not touch fusible and inflammable objects
(plastic, polyethylene, synthetic materials etc.).

SAFETY MEASURES

Before using the electrical unit, read this instruction manual
carefully and keep it for future reference.
Use the unit for its intended purpose only, as specified in this
manual. Mishandling of the unit may lead to its breakage and
cause harm to the user or damage to his/her property.
•
Before switching the unit on, make sure that voltage of the
mains corresponds to unit operating voltage.
•
Never leave the operating unit unattended.
•
Do not switch the unit on in places where aerosols are
sprayed or highly flammable liquids are used.
•
Hair spray should be applied only after hair straightening
is finished.
•
Always unplug the unit immediately after usage and before
cleaning.
ENGLISH
3
12.01.2017 9:27:27