Table of Contents
Advertisement
Section 3 - Configuration
This section allows you to configure functions related to Network Address Translation (NAT) such as port triggering.
p
t
ort
rigger
Use this option to have inbound traffic automatically
forwarded to a dynamic address on the LAN when triggered
by outbound traffic. To add a new port triggering rule, click
Add.
Active:
Check the box to activate this rule.
Name:
Specify a name to identify the rule.
Trigger
Select TCP or UDP as the protocol for the trigger ports from
Protocol:
the drop-down menu.
Trigger Port:
Enter the starting and ending trigger port for the rule.
Open Protocol:
Select TCP or UDP as the protocol for the ports to be opened
from the drop-down menu.
Open Port(s):
Enter the starting and ending ports to be opened when the
trigger occurs.
Delete:
Click the Delete icon to delete the rule.
Click OK.to save the rule. Click Apply to apply the current
rules and return to the Network page.
D-Link DWR-730 User Manual
NAT
26
Advertisement
Table of Contents
