Configuration
NAT
To access the Network Address Translation (NAT) Setup window, click the NAT button in the Advanced Setup directory. The NAT button appears when
configuring WAN interface in PPPoA, PPPoE, IPoE or IPoA.
Virtual Servers
This window is used to configure virtual server. You can add, delete, and modify
virtual server on this window.
If you are setting up the virtual server, click the Add button.
You can configure the service settings on this window by clicking the Select a
Service radio button and then using the drop-down list to choose an existing
service, or by clicking the Custom Server radio button and entering your own
Application Rule in the field provided.
Click Apply / Save when you are finished with the virtual server configuration.
Port Triggering