Cpu Installation - Biostar P4TSG Pro Description

CPU Installation

Step1: : : : Pull the lever sideways away from the socket and then raise the lever up to a Step1
Step1 Step1
90-degree angle.
Step2: : : : Look for the white dot/cut edge. The white dot/cut edge should point wards the Step2
Step2 Step2
lever pivot. The CPU will fit only in the correct orientation.
Step3: Step3: Hold the CPU down firmly, and then close the lever to complete the installation.
Step3: Step3:
Step4: Step4: Step4: Step4: Put the CPU Fan on the CPU and buckle it. Connect the CPU fan power cable to
the JCFAN1. This completes the installation.
Step1 Step1 Step1 Step1
CPU Fan Headers: JCFAN1
1
JCFAN1
System Fan Headers: JSFAN1
1
JSFAN1
Step2 Step2 Step2 Step2 Step3 Step3 Step3 Step3
Pin Assignment
1 Ground
2
+12V
3 FAN RPM Sense
Pin Assignment
1
Ground
2 +12V
3 FAN RPM Sense
6
Step4 Step4 Step4 Step4