Table of Contents
Advertisement
Safety
2.7
Safety procedures
●
The device may not be operated in closed areas (danger of poisoning by exhaust gases).
●
Refuelling the device may take place only, if the engine is so far cooled down that no fire and danger of
explosion exist.
●
Maintenance work may take place only with shut down device, i.e. the rotation arm may not itself moving
any more (after switching off at wait least one minute!) and the exhaust system must be so far cooled down
that no burn danger exists.
●
Worn brushes must be exchanged.
2.8
Function Control
2.8.1
General
●
Before using the device check the functions and the working condition.
●
Maintenance and lubrication are only permitted when device is shut down!
●
Do not use the device, until all faults which can cause safety hazards are removed.
●
If there are any cracks, splits or damaged parts on any parts of the device, immediately stop using it.
●
The operating instructions must be available at the workplace every time.
●
Do not remove the type plate of the machine.
●
Unrecognisable information signs (such as regulatory or prohibition signs) must be replaced.
2.8.2
Unauthorized alterations
All unauthorized alterations of the device and the use of any self-made additional equipment could cause
danger and are therefore forbidden!
6 / 16
Advertisement
Chapters
Table of Contents
