Maintenance And Care; Maintenance; Mechanical - probst EASYCLEAN EC-60 Operating Instructions Manual

Maintenance and care

6 Maintenance and care
6.1

Maintenance

To ensure the correct function, safety and service life of the device the following points must be executed in the
maintenance interval.
Used only original spare parts, otherwise the warranty expires.
All operations may only be made in closed state of the device!
For all operations you have to make sure, that the device will not close unintended. Danger of injury!!!
6.2

Mechanical

SERVICE INTERVAL
First inspection after
25 operating hours
All 50 operating hours
Minimum 1x per year
(at rough conditions shorten the
interval)
Clean the dirt filter once a month (with water jet, if
necessary tapping out)
As thread sealing:
As assembly fat:
As oil (for crank enterprise):
Since with longer downtimes of the device lime deposits develops, absolutely flush the water lines with lime-free
water.
Maintenance work
●
Control and tighten all screws and connections.
(The implementation is only allowed by an expert).
●
Tighten all screws and connections (take care that the tightening torques according
to the property class of the screws are observed).
●
Check all existing safety elements (such as linchpins) for perfect function and replace
defective safety elements.
●
Check all joints, bolts, guidance's and gears for correct function, if necessary adjust or
replace it.
●
Check all grippers (if available) for signs of wear.
●
Grease all slidings (if available) when the device is in opened position with a spatula.
●
Grease all grease nipples (if available) with a grease gun.
●
Check of all the suspension parts, bolts and straps. Check for corrosion and safety by
an expert.
use Loctite 542 (liquid)
Emulsify Lithum, use water-steady fat.
Use mineral engine oil 15W40.
13 / 16
Dirt filter