Admixing From Cleaning Agents; Accessories: Sand Blasting Kit Ssk - probst EASYCLEAN EC-60 Operating Instructions Manual

Operation
5.2.1

Admixing from cleaning agents

To clean a surface, with strong degree of pollution with a cleaning agent, a suction hose must be attached
(see pic. 5, 5b).
!
When adding cleaning agents, the lance must be changed to low pressure!
Pic. 6
Changing from high to low pressure
Lance – flat jet nozzle (see arrow )
5.2.2

Accessories: Sand Blasting Kit SSK

For erasing persistent dirt up to derusting and similar applications. This kit
allows intake and dosage of sand for blasting (quartz sand with max. grain
0,1 - 0,5 mm).
●
Connect sand blasting kit at the device.
●
Start the device (EC 60).
●
Wait as long as the pump sucks water, than open the cross flow. Since
otherwise air is sucked over the cross flow.
Pistol with lance (flat jet nozzle)
Change set Lance with rotation
nozzle
Lance – rotation nozzle (see arrow)
12 / 16