Table of Contents
Advertisement
BACKGROUND OPERATIONS
Your dealer can activate a variety of transceiver functions to
perform without any additional operation on your part.
C
(NX-200/ NX-300/ NX-200G/ NX-300G O
LOCK
If activated by your dealer, you can view the clock by pressing
the key programmed as Clock.
Note: Removing or leaving the battery pack uncharged for
extended periods will clear the clock time.
To set the clock:
1 Press the key programmed as Clock Adjustment.
•
The current time setting appears.
2 Press
/
3 Press
to set the year and cycle to the month setting.
4 Repeat steps 2 and 3 to set the month, day, hour, and minute.
5 Press
to exit Clock Adjustment mode.
•
You can press
V
IBRATOR
When an optional vibrator is installed, the vibrator function will
alert you when an optional signaling call is received. Press the
key programmed as Vibrator, or access the Menu {page 15},
to turn the Vibrator function ON and OFF.
T
-
T
IME
OUT
IMER
The Time-out Timer is used to prevent you from using a
channel for an extended duration. If you continuously transmit
for a preset time, the transceiver will stop transmitting and an
alert tone will sound. Release the PTT switch.
to increase or decrease the year setting.
at any time to exit Clock Adjustment mode.
(TOT)
)
NLY
29
Advertisement
Table of Contents
