Table of Contents
Advertisement
■ Reviewing Messages in the Stack Memory
(NX-200/ NX-300/ NX-200G/ NX-300G Only)
1 Press the key programmed as Stack, or press and hold
the key programmed as Selcall, Status, or Selcall +
Status to enter Stack mode.
•
The last received message is displayed.
2 Press
•
Message types are identified as follows:
I: Caller ID, S: Status Message, M: Short Message
•
Press and hold
display information as follows:
ID Name > Status/Short Message > CH/GID > Time Stamp
3 Press
•
To delete the selected message, press
To confirm the deletion, press
•
To delete all messages, press and hold
To confirm the deletion, press
S
/L
HORT
ONG
Received short messages are displayed the same as Status
messages and are stored in the same stack memory (NX-200/
NX-300/ NX-200G/ NX-300G Only).
To send and receive long messages, you must connect the
transceiver to a PC. Ask your dealer for details.
GPS R
EPORT
GPS data can be manually transmitted by pressing the key
programmed as Send the GPS data, or by accessing the
Menu {page 15}. If set up by your dealer, GPS data may be
automatically transmitted at a preset time interval.
•
When using the NX-200G/ NX-300G, you must first connect the
VHF/ GPS antenna or UHF/ GPS antenna.
•
When using the NX-200/ NX-300/ NX-200S/ NX-300S, you must
first connect an external GPS unit.
22
/
to select the desired message.
to return to normal operation.
M
ESSAGES
for 1 second or press
or
or
to cycle the
or #.
.
or # for 1 second.
.
Advertisement
Table of Contents
