Getting Acquainted - Kenwood NX-200GK Instruction Manual

NX-200S/ NX-300S
a Selector knob
Rotate to select a zone or channel/group ID (default).
b Power switch/ Volume control
Rotate to turn the transceiver ON/OFF and to adjust the volume.
c Auxiliary key
Press to activate its programmable function {page 8}.
d Transmit/ Receive/ Battery low indicator
If enabled by your dealer, lights red while transmitting,
green while receiving a call (Conventional channels only),
and orange when receiving an optional signaling call. Blinks
red when the battery power is low while transmitting.
e PTT (Push-To-Talk) switch
Press and hold this switch, then speak into the microphone
to call a station.
f Side 1 key
Press to activate its programmable function {page 8}. The
default is Squelch Off Momentary.
g Side 2 key
Press to activate its programmable function {page 8}.
h Universal connector
Connect a speaker/ microphone or headset here {page 3}.
Otherwise, keep the supplied cap in place.
4

GETTING ACQUAINTED